What definitions apply to this chapter? [49 CFR 192.1001]

(A)A. The following definitions apply to this Subpart. [49 CFR 192.1001]#

Excavation Damage―any impact that results in the need to repair or replace an underground facility due to a weakening, or the partial or complete destruction, of the facility, including, but not limited to, the protective coating, lateral support, cathodic protection or the housing for the line device or facility.#

Hazardous Leak―a leak that represents an existing or probable hazard to persons or property and requires immediate repair or continuous action until the conditions are no longer hazardous.#

Integrity Management Plan or IM Plan―a written explanation of the mechanisms or procedures the operator will use to implement its integrity management program and to ensure compliance with this chapter.#

Integrity Management Program or IM Program―an overall approach by an operator to ensure the integrity of its gas distribution system.#

Mechanical Fitting―a mechanical device used to connect sections of pipe. The term "Mechanical fitting" applies only to:#

(a)a. stab type fittings;#

(b)b. nut follower type fittings;#

(c)c. bolted type fittings; or#

(d)d. other compression type fittings.#

Small LPG Operator―an operator of a liquefied petroleum gas (LPG) distribution pipeline that serves fewer than 100 customers from a single source.#

AUTHORITY NOTE: Promulgated in accordance with R.S. 30:501 et seq.#

HISTORICAL NOTE: Promulgated by the Department of Natural Resources, Office of Conservation, LR 38:122 (January 2012).#