Manual Service Line Shut-Off Valve Installation [49 CFR 192.385]

(A)A. Definitions, as used in this Section.#

Manual Service Line Shut-Off Valve—a curb valve or other manually operated valve located near the service line that is safely accessible to operator personnel or other personnel authorized by the operator to manually shut off gas flow to the service line, if needed. [49 CFR 192.385(a)]#

(B)B. Installation Requirement. The operator must install either a manual service line shut-off valve or, if possible, based on sound engineering analysis and availability, an EFV for any new or replaced service line with installed meter capacity exceeding 1,000 SCFH. [49 CFR 192.385(b)]#

(C)C. Accessibility and Maintenance. Manual service line shut-off valves for any new or replaced service line must be installed in such a way as to allow accessibility during emergencies. Manual service shut-off valves installed under this section are subject to regular scheduled maintenance, as documented by the operator and consistent with the valve manufacturer's specification. [49 CFR 192.385(c)]#

AUTHORITY NOTE: Promulgated in accordance with R.S. 501 et seq.#

HISTORICAL NOTE: Promulgated by the Department of Natural Resources, Office of Conservation, Pipeline Division, LR 44:1040 (June 2018).#